Rate Limiter Algorithms

Tue, 29 Sep 2026 21:32:00 +0900

Servers and databases are finite. When requests pile up or spike, something has to control the inflow before the load takes those resources down.

That is what a rate limiter does: it is a component that controls the rate of traffic sent by a client or a service.

Use Cases

Rate limiters serve many purposes:

Capping daily requests on a free public API to keep operating costs down
Limiting login attempts per user per minute to prevent brute-force attacks
Limiting the number of client requests to defend against malicious requests or DoS attacks
Throttling a ticketing system when traffic surges on the day sales open, so the booking service doesn’t fall over

The purposes vary, and protecting server-side resources is only one of them. What a rate limiter does, in the end, is control how many requests are allowed per unit of time.

Algorithms

So how do we count requests, and how do we cap them? The commonly used rate limiting algorithms are:

Token Bucket
Leaky Bucket
Fixed Window Counter
Sliding Window Log
Sliding Window Counter

Each algorithm has its own pros and cons, and each fits different situations. Let’s walk through them, assuming a system that limits requests per IP.

Token Bucket

There is a bucket, and tokens are added to it at a fixed rate. Once the bucket is full, no more tokens are added. When a request comes in, it takes one token from the bucket and passes through. If the bucket is empty, the request is dropped.

 refill: r tokens/sec
 │
 ▼
 ┌─────────┐ overflow (bucket full) → token discarded
 │ ● ● ● ● │ ◀─ capacity = b
 │ ● ● ● │
 │ ● ● │ tokens = currently remaining
 └────┬────┘
 │ 1 request = 1 token consumed
 ▼
 request ──▶ has token? ──yes──▶ pass
 │
 no ──▶ reject (429)

Characteristics

Allows bursts up to what has accumulated in the bucket (at most b requests at once)
The sustained rate is capped at r

Pros

Simple to implement
Memory efficient
Handles bursts of traffic (as long as there are tokens in the bucket)

Cons

Tuning its two parameters, bucket size and refill rate, is tricky.
- How much burst should we allow?
- How many requests should we allow per unit of time?

Leaky Bucket

The processing rate is fixed. Requests arrive at a queue; if there is room, they are enqueued, otherwise they are dropped. On every tick, requests are dequeued and processed at the fixed rate. In other words, the server decides how many requests it can handle per unit of time and processes at most that many.

 requests (irregular, bursty)
 │ │ │ │ │
 ▼ ▼ ▼ ▼ ▼
 ┌───────────────┐
 │ ▒▒▒▒▒▒▒▒▒▒▒▒▒ │ ◀─ new requests rejected when queue is full
 │ ▒▒▒▒▒▒▒▒▒ │ (capacity = queue size)
 │ ▒▒▒▒ │
 └───────┬───────┘
 │ leaks at a constant rate (leak rate = r)
 ▼
 ─ ─ ─ ─ ─ ─ uniform output (burst smoothed out)

Characteristics

Output never exceeds r
Absorbs bursts, but delays them instead of letting them through

Pros

Memory is bounded by the queue size
The fixed processing rate suits cases where a stable output rate matters

Cons

When traffic spikes briefly, the most recent requests get dropped, and the ones that made it into the queue wait, adding latency
Tuning its parameters, bucket (queue) size and processing rate, is tricky

Note: the meter variant

Note that besides the queue-based version described here, Leaky Bucket can also be implemented as a meter. The meter version doesn’t queue requests; it only tracks the bucket’s water level (a counter). Each request raises the level by 1, and the level drains at a constant rate (r) over time. If the level would exceed capacity, the request is rejected. Since requests are passed or rejected immediately instead of being delayed, it effectively behaves the same as a Token Bucket. (NGINX’s limit_req works this way, and its burst/delay options let it delay requests like a queue.)

Fixed Window Counter

Split the timeline into fixed-size windows and keep a counter for each window.

 limit = 5 / window (e.g. 1 min)

 window 1 window 2 window 3
 ┌─────────────────┬─────────────────┬─────────────────┐
 │ ● ● ● ● ● ✕ ✕ │ ● ● │ ● ● ● ● │
 │ count=5 (full) │ count=2 │ count=4 │
 └─────────────────┴─────────────────┴─────────────────┘
 00:00 01:00 02:00 03:00
 ▲
 └ counter reset to 0 at the boundary

Around window boundaries, more requests than the limit can get through within a span of one window size.

Problem: bursts on both sides of a boundary let 2×limit through
 ┌────────────┬────────────┐
 │ ●●●●●│●●●●● │ ← 10 requests pass between 00:59 and 01:01
 └────────────┴────────────┘

Characteristics

The simplest to implement (one window key + one counter; Redis INCR + EXPIRE and you’re done)
O(1) memory, O(1) operations; in a distributed setup, only a single counter needs to be shared

Pros

Memory efficient
Easy to understand
A good fit when resetting the counter at the end of a window matches the traffic pattern, e.g. resetting the purchase count for an item limited to 5 per day

Cons

When traffic concentrates around window boundaries, the system ends up handling more requests than intended.

Sliding Window Log

Track the timestamp of each request. When a new request arrives, remove the timestamps that have expired out of the window, then append the new request’s timestamp to the log. If the log size is less than or equal to the limit, the request is accepted; otherwise it is rejected. In this variant, timestamps of rejected requests stay in the log as well, so a client that keeps hammering the endpoint doesn’t get back in until it actually backs off.

 limit = 5 / 60s, now = 100s

 log at the previous request (t = 99)
 ◀──────────── window (39, 99] ────────────▶
 ┌──────┬──────┬──────┬──────┬──────┬──────┐
 │ 40 │ 42 │ 58 │ 71 │ 90 │ 99 │
 └──┬───┴──────┴──────┴──────┴──────┴──────┘
 │
 └─ ≤ now-60 = 40 → expired, removed

 remove 40, append the new request's timestamp (100)
 ┌──────┬──────┬──────┬──────┬──────┬──────┐
 │ 42 │ 58 │ 71 │ 90 │ 99 │ 100 │
 └──────┴──────┴──────┴──────┴──────┴──────┘
 ◀─────────── window (40, 100] ────────────▶
 count = 6 > 5 → new request rejected

Characteristics

Accurate
Stores a timestamp per request → memory grows with the number of incoming requests in the window (including rejected ones)

Pros

Precise limiting: in any window, the number of accepted requests never exceeds the limit

Cons

Uses a lot of memory, since timestamps of rejected requests are kept too

Sliding Window Counter

A refinement of Fixed Window Counter that approximates Sliding Window Log with just two counters. With window = 1 min, estimate the number of requests in the last minute as:

estimate = requests in the current window (excluding the incoming one)
 + requests in the previous window × fraction of the previous window that overlaps the last 1 min

The incoming request is accepted if estimate < limit.

 limit = 5 / 60s, window size 60s, now = 01:20 (1/3 into the current window)

 previous (00:00~01:00) current (01:00~02:00)
 ┌────────────────────────┬────────────────────────┐
 │ prev = 6 │ curr = 2 │
 └────────────────────────┴────────────────────────┘
 ◀─ sliding window (60s) ─▶
 └──── overlap ───┘
 00:20 01:00 01:20

 overlap = 1 - 1/3 = 2/3

 estimate = curr + prev × overlap
 = 2 + 6 × 2/3 = 6 ≥ 5 → rejected

Characteristics

Stores only two counters (O(1) memory)
An approximation that assumes requests in the previous window were evenly distributed

Pros

Smooths out the boundary problem of Fixed Window Counter by weighting in the previous window
Memory efficient

Cons

It’s an approximation, not exact: it may reject legitimate requests, or allow requests beyond the limit.
- In practice, though, the error is small. Cloudflare measured it over 400 million requests and found that only 0.003% were wrongly allowed or rate limited. (Counting things, a lot of different things…)
Bursts around the boundary are only damped, not fully prevented
Opaque to clients: the exact remaining quota and the value to send in the Retry-After header are hard to compute

Handling Requests Over the Limit

To tell a client it has been rate limited, respond with the 429 Too Many Requests status code, and use the Retry-After header to say when it can try again (RFC 6585). Headers like X-RateLimit-Limit, X-RateLimit-Remaining, and X-RateLimit-Reset are also widely used (GitHub and Twitter, among others), but they are a convention rather than a standard; the IETF is standardizing RateLimit and RateLimit-Policy headers in draft-ietf-httpapi-ratelimit-headers.

Rate-Limiter · chaewonkong

Rate Limiter Algorithms

Use Cases

Algorithms

Token Bucket

Characteristics

Pros

Cons

Leaky Bucket

Characteristics

Pros

Cons

Note: the meter variant

Fixed Window Counter

Characteristics

Pros

Cons

Sliding Window Log

Characteristics

Pros

Cons

Sliding Window Counter

Characteristics

Pros

Cons

Handling Requests Over the Limit